Poinsettia Crochet Coaster – Free Eight-Petal Christmas Pattern

Advertisements


This poinsettia crochet coaster has eight pointed red petals, a small ivory center and eight open scallops. The ivory arches join neighboring petal tips, leaving open spaces around the flower.

This photo-inspired adaptation uses separately crocheted petals. The visual reference is credited to CraftBits (Shellie Wilson). The stitch counts were checked on paper. This adaptation has not been physically crocheted or tested.

Advertisements


Poinsettia Crochet Coaster: red eight-petal crochet poinsettia coaster with a tiny ivory center and eight open ivory scallops on linen

Poinsettia Crochet Coaster Materials

  • Smooth DK (light 3) cotton in cherry red and warm ivory. Allow roughly 9–13 g of red and 5–8 g of ivory per coaster (planning estimates).
  • 3.5 mm crochet hook as a starting point, a blunt yarn needle, scissors, removable markers, blocking mat and rustproof pins.
  • Intermediate. Estimated diameter: 4–5 in (10–13 cm) after blocking, depending on yarn and tension.

Use the same yarn weight for both colors. Keep the petal foundations loose enough to work into both sides. Make one petal and check that it lies flat before making the other seven. The sample size depends on the length of that petal and the height of the edging.

US crochet terms and working notes

ch chain, sl st slip stitch, sc single crochet, hdc half double crochet, dc double crochet, tr treble crochet, st stitch, sp space, MR magic ring, RS right side.

For a tr, yarn over twice, insert the hook, pull up a loop, then yarn over and draw through two loops three times. Work around an arch by inserting the hook under the whole chain, then spreading the resulting stitches along it.

Work joined rounds with the RS facing throughout. Beginning ch 1 and joining slip stitches are excluded from the counts. Mark the first counted stitch of each joined round. The chains that form the petal tip loop and border arches are counted separately. Cut and rejoin yarn as indicated for clean color changes.

Stitch counts at a glance

SectionColor and quantityCompleted count
Center, Rnd 1Ivory, make 18 hdc
Petal, Rnd 1Red, make 85 sc, 4 hdc, 4 dc, 2 tr and one ch-2 tip loop per petal
Border, Rnd 1Ivory, work once8 sc and eight ch-7 arches (56 arch chains)
Border, Rnd 2Ivory, work once8 valley sl sts, 16 hdc, 32 dc and 24 tr (8 scallops)

Ivory center (make one)

Rnd 1. With ivory, make an MR and ch 1. Work 8 hdc into the ring, marking the first hdc. Pull the ring snug, join with a sl st in the first hdc and fasten off. Leave a tail long enough to weave securely through the backs of the center stitches. 8 hdc.

Pointed red petals (make eight)

Foundation. Leave a 10 in (25 cm) tail for sewing and ch 8. Number the chains from the hook, with chain 1 nearest the hook and chain 8 nearest the starting tail. Work into one loop on the first side, leaving the opposite side accessible on the return.

Rnd 1, first side. Sc in chain 2 and mark it. Work hdc in chain 3, dc in chain 4, tr in chain 5, dc in chain 6 and hdc in chain 7. Work 2 sc in chain 8. These two stitches form the base of the petal. Mark that pair for assembly.

Rnd 1, return side. Rotate the chain in the plane of your work, keeping the same face up. Along its unworked side, work hdc in chain 7, dc in chain 6, tr in chain 5, dc in chain 4 and hdc in chain 3. In the unused side of chain 2, work sc, ch 2, sc. Join with a sl st to the marked first sc and fasten off. Mark the ch-2 loop at the pointed end for the border. 15 stitches plus one ch-2 loop. Chain 2 is shared by the first sc and the two final sc, while chain 1 is skipped.

Assemble the red flower

Lay the center RS up. Arrange the eight petals RS up with their tips pointing outward, one petal base aligned with each center hdc. Using each red starting tail, sew its two base sc through the back loop of the assigned center hdc with two small passes, then secure the tail through the back of that petal. Keep the seam shallow and leave the front loop of each ivory hdc visible. Attach opposite petals first, then fill the gaps. Leave a narrow opening between neighbors and check that the eight marked tips sit at roughly the same distance from the center.

Ivory scalloped border

Rnd 1, arches. Join ivory with a sl st in the ch-2 loop of any petal tip. Ch 1, then sc around that loop and mark the sc. Ch 7. Repeat [sc around the next petal tip loop, ch 7] seven times, working around the flower in order. Join with a sl st to the marked sc. 8 sc and eight ch-7 arches. Each tip receives one sc. The final arch runs from the eighth tip back to the first. Lay the flower flat before continuing and relax your chain tension if the arches pull neighboring tips together.

Rnd 2, scallops. Sl st into the first sc anchor at the join to begin the first valley, and mark that slip stitch. Work [hdc, 2 dc, 3 tr, 2 dc, hdc] around the first ch-7 arch. Repeat [sl st in next sc anchor, (hdc, 2 dc, 3 tr, 2 dc, hdc) around next arch] seven times. Join with a sl st to the marked valley slip stitch and fasten off. 8 valley sl sts and 72 tall stitches: 16 hdc, 32 dc and 24 tr. Each of the eight arches receives nine stitches. Spread the taller center stitches evenly and leave the open space below the arch clear.

Finishing, adjustments and care

Weave each remaining tail through the back of matching stitches, change direction once and trim. Dampen the cotton according to the label. Pin the eight petal tips evenly, then ease the eight scallops into rounded arcs, keeping the center flat. Let dry completely. If the center bunches, loosen the petal seams. If the border lifts the tips, redo the chains more loosely. If it waves after blocking, check that each arch holds exactly nine edging stitches and that each valley has just one slip stitch.

Check the coaster with the intended cup before making a set. The cup needs a flat, stable base over the flower. Wash according to the yarn label, check red cotton for color transfer, and reshape and dry flat. Repeat all sections once per additional coaster.

For another seasonal project, see the Christmas Scallop Crochet Coaster.

Visual tutorial and crochet charts

The generated illustrations show the intended appearance and construction order. The two charts show one repeat each, for a petal and a border scallop. Use the written directions for all joins, placement and final counts.

Four illustrated stages showing the ivory center, a separate red petal, the assembled flower with chain arches and the finished coaster
Illustrated sequence: crochet the center and eight separate petals, sew the flower, join the tips with ivory chains, then fill each arch.
Illustrated poinsettia assembly guide with eight red petals, a stitch symbol legend and a petal detail above the finished coaster on oak
Chart 1. One pointed red petal. Follow the written round for the tip loop and join.
Illustrated poinsettia border guide with a scallop stitch chart and symbol legend above the finished coaster on walnut
Chart 2. One ivory arch and scallop. Follow the written rounds for the eight repeats.
Red and ivory crochet flower coaster on linen under the words Poinsettia Coaster
Red and ivory coaster on a wood table beside evergreen sprigs under the words Christmas Crochet
Red and ivory coaster on pale stone with matching yarn under the words Eight Petals

Deixe um comentário

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *

Rolar para cima